doubl row ball slewing bearing
The double row ball slewing bearing has two row steel balls for structure, it has bigger load capacity comparing to single row type slewing bearing and better safety factor, and it could bear axial load, radial load and tilting moment at the same time. Double row ball slewing ring has three seat rings, the steel ball and the spacing block can be directly arranged into the upper and lower races, two rows of upper and lower steel balls with differently diameter are fitted according to the stress condition. Double row different ball slewing bearing ring’s axial and radial size are relatively large and solid in structure, so it is usually used in diameter tower cranes, truck mounted cranes etc. Double row ball slewing bearing ring is mainly made of 50Mn, 42CrMo, C45.
The double-row ball slewing bearing can carry axial load, tilting moment and radial loads at the same time. The top ball mainly carries the axial load and positive tilting moment. The drop ball takes the opposite tilting moment. This is the reason for the loading capacity of the double row ball slewing bearing being larger than the four-point contact ball slewing bearing; however, the frictional ratio is much larger. than the latter.
- Hot Sale Heavy Duty Single Row Crossed Roller Crane Use Slewing Bearing
- 104000 N
- 6800 rpm
- For medium diameter tower crane used slewing ring bearing
- 0.98 kN
- YARAG 210-115
- Stock Double Row Ball External Gear Slewing Bearing for Crane on sale
- 110.000 mm
- 2400 rpm
- Stock Double Row Ball External Gear Slewing Ring Bearing for truck Crane on sale
- 5200 rpm
- One Shield
- Super Quality Double Roll Ball Slewing Bearing For Cranes
- 231.775 mm
- 950 r/min
- Super Quality and good price Double Row Ball Slewing Bearing For Tower Crane
- 130.175 mm
- 190.5 mm
- Double Row Ball Slewing Bearing For Bucket Wheel Excavator
- 3000 rpm
- 28.00 mm
- 021.30.1120 Double Row Ball Slewing Bearing For Tower Crane
- 69.5 kN
- 2.36 kN